80-200KW Energy Saving Dry Mix Powder Mortar Mixing Plant Wall Putty Sand Cement Mixer Ceramic Tile Adhesive Making Machine

The MG Automatic Dry Mix Mortar Plant is an intelligent PLC-controlled production line designed to mix dried sand, cement, thickening powder, fly ash, and other functional additives according to different recipes. The plant produces bagged or bulk dry mortar, which can be applied directly after being proportionally mixed with water and stirred briefly.

This double-shaft mixing system is suitable for manufacturing wall putty, ceramic tile adhesive, masonry mortar, and a wide range of other dry-mix construction materials.

The non-gravity mixer operates on the principle of mixing materials in an air countercurrent. Double-shaft paddles are installed inside the drum and rotate in opposite directions. Each paddle is designed with a rational separation distance and angle, determined through scientific calculation.

When materials are thrown into the air current inside the drum by the rotating paddles, a non-gravity force is instantaneously generated and the materials are thrown to the opposite area. A fluidized non-gravity zone and air eddy current form between the twin shafts, while an air flowing layer forms at the bottom of the drum. As a result, materials undergo three-dimensional compound motion, ensuring even, rapid, and circular mixing in all directions.

The machine can be widely applied to drying and mixing chemical materials, metal materials, construction materials, coating materials, resins, agricultural materials, feedstuffs, and various powder materials.

• Multiple material discharging modes are available for selection, including manual, electrical, and pneumatic modes.
• Fiber can be rapidly separated by high-speed rotating blades.
• An air-phase balancing device is installed to ensure more even material mixing.
• The compound paddle structure largely reduces maintenance costs.
• Materials are discharged through a large gate, reducing blind areas inside the mixer and making the discharging procedure cleaner and faster.
• Capable of mixing solid-solid (powder and powder) and solid-liquid (powder and liquid) materials, and also performing drying operations.
• Mixing speed is fast — ordinary powders require only about 2–3 minutes.
• The machine can be operated in confined spaces, running reliably with convenient maintenance.

The MG automatic dry mix mortar plant can be used to produce the following dry mortars:

• Bonding mortar: masonry mortar, wall and floor tile adhesive mortar, anchorage mortar, and more.
• Decoration mortar: decorative plaster, inner and outer wall putty, colorful decoration mortar, and more.
• Protection mortar: waterproof mortar, anti-corrosion mortar, self-leveling mortar, wear-resistant mortar, thermal insulation mortar, sound insulation mortar, repair mortar, mildew-proof mortar, shielding mortar, and more.

We specialize in providing turn-key service to numerous customers with energy-saving and efficient practical solutions. The main advantages of dry powder mixing equipment from Zhengzhou MG, compared with other suppliers, include:

1. Over 20 years of experience in dry mortar production lines. Since 2000, Zhengzhou MG has dedicated itself to the research and development of dry powder mixing equipment for decades, holding a leading position in the industry.
2. We provide customers with a decade of construction management experience and multiple efficient project solutions.
3. Special additives from Zhengzhou MG guarantee the quality of dry mortar produced by our clients.

We promise all customers that upon choosing our services and products, we will provide first-class product quality, the latest mortar formula technology, and special additives — ensuring the good quality of dry mortar produced by our equipment.