Product Details:
|
Material: | Carbon Steel | Voltage: | 220V/380V/410V/440V Or Customized |
---|---|---|---|
Color: | Blue, Gray, Red, Yellow Or Customized | Collection Efficiency: | >99% |
High Light: | pulse jet dust collector,cyclone type dust collector |
Industrial Pulse Jet Dedusting Filter Dust Collector Pulse Dust Collector
Description of Impulse Dust Collector Pulse Dust Collector
Impulse dust collector adopts the single pulse injection cleaning method, which has the advantages of good cleaning effect, high purification efficiency and high handling capacity, longer service life of Filter-bag, less maintenance to ensure its safe and reliable in operation. The system is widely used in metallurgy, building materials, machinery, chemical industry, mining and other industrial enterprises of non-fiber industrial dust removal and material recovery.
Working principle of Impulse Dust Collector Pulse Dust Collector
The working principle of dust collector:the dust gas enters into the filter chamber by the ash bucket (or the lower open flange), and the rough particles directly drops in the ash bucket or ash bin. Filtered through the Filter-bag, the dust is kept in the bag table while the net gas is passed through the bag to the air cleaning chamber, in which the air is discharged into the atmosphere by the fan.
When the dust on the surface of the filter is increasing, leading to the equipment resistance rises to the set value, the time relay (or the micro differential pressure controller) will release the signal. Meanwhile, the program control instrument began to work, and the pulse valve is opened one by one, so that the compressed air is injected through the nozzle to clean the Filter-bag. During this process, the Filter-bag is abruptly inflated, the dust in the bag surface quickly detaches from the Filter-bag and falls into the dust (or ash bin) under the action of the reverse airflow, then the dust is discharged by the flap valve. In addition, The line by line process of injection is only for the filter-bags cleaning, and other Filter-bags are still filtered normally.
Advantages of Dust Collecting System
1. Tangential inlet guides, on the basis of non-filter added the centrifugal dust collect effect, improved the dust collection efficiency.
2. Use special fabric filter dust,well dust collect.
3. Fan, cloth cylinder and filter assembly as one, can shorten the wind mesh simplify workmanship
process,reduce the investment of dust collector equipment.
Application of Impulse Dust Collector Pulse Dust Collector:
1,Putty powder
2,Masonry mortar,
3,Thin and Smooth wall mortar,
4,Water proof mortar,
5,Plaster powder,
6,Wall plastering mortar,
7,Ceramic tile adhensive mortar,
Raw materials are: Cement, Sand, Flyash, Gelatine powder, Cellulose and Additives etc.
Qingdao, china
Technical Parameter of Dust Collecting System
Model | MG-5.0 | MG-5.1 | MG-5.2 | MG-5.3 |
Dust bag | 9 | 16 | 25 | 36 |
Filtration area (m2) | 6.5 | 11.6 | 18.1 | 26 |
Air Volume(m3/h) | 1334-1896 | 2670-5270 | 4020-7420 | 5730-10580 |
Wind Pressure(Pa) | 2370-2770 | 1000-1600 | 1340-2040 | 1700-2580 |
Power(Kw) | 2.2 | 4.0 | 7.5 | 15.0 |
The dust collector equip on full automatic dry mortar plant:
The dust collector equip in our factory:
Delivery and transportation of the dust collector
We are professional manufacturer of dry mortar machines, our company dedicated in this field for more than 20 years, we alreays provide our customer turnkey project of dry mortar plant from working site planning to machine installation and commissioning, formula, opeation training, technical support etc.
Escort for your sucess!
Contact Person: Mr. Liu
Tel: 0086-15638816139
Fax: 86-0371-56659866