|Condition:||New||Application:||Tile Adhesive Mixing And Packagiing|
|Place Of Rigin:||Henan, China( Mainland)||Color:||Grey/White/Blue Or Customized|
|After-sales Services:||Engineer Available To Service Machinery Overseas||Technical Support:||Provide|
|Packaging:||Valve Bag Or Open Bag Packaging|
tile adhesive production line,
tile adhesive mortar plant
German Technology Tile Adhesive Machine / Tile Adhesive Production Line
Raw material of dry mortars:
1. Cementing material: cement, lime, plaster.
2. Aggregate: yellow sand, quartz sand, limestone, dolomite, expanded perlite etc.
3. Mineral admixture: industrial byproduct, industrial slag, fly ash, pozzolana, fine silica powder etc.
4. Water-retention and thickening material.
5. Chemical additives.
Descriptions of MG tile adhesive machine:
MG series tile adhesive machine is based on the latest design concept in Europe, this production adopts the advanced computer auto-control system, whose production capacity can reach 30-100 thousand tons per year depend on the system configuration. The production line consists of storage system, metering and batching system, conveying system, mixing system, air compressor system , packaging system, and dedusting system, etc
Mixer for continuous mixing. The finished product in conformity with mixing accuracy requirements can be sent to the finished products bin shortly after mixed. Moreover, there is design with automatic rationing and packaging machine at the bottom of finished products bin, allowing for synchronous auto-packaging operation. Featured with easy and convenient operation, high efficiency, it can both obviously reduce labor intensity and effectively reduce dust pollution.
Features of MG tile adhesive machine:
1.It features magnificent appearance, good quality, high productivity and accurate mortar proportioning.
2. The dry mortar production line uses a centralized control system, making the equipment easy to operate.
3. According to the layout type, it can be classified into tower type, self tower type and series type. Its up to the customers workshop area. The needed area is 500~5000m2.
4. We can provide one-stop service from design to installation according to our customers' specific requirement.
Technical parameters of MG tile adhesive machine:
|Model||Out put||Occupied area||Equipment height||Manpower||Batching and packaging|
|Simple type||3t/h||20m2||3-4m||2-3 Person||
|Semi-automatic type||6-8t/h||50-60m2||6-8m||3-4 Person||
|Full automatic type||8-30t/h||60-100m2||8-13m||3-4 Person||
Application of MG automatic tile adhesive machine:
The tile adhesive machine can produce the following dry mortars: Bonding mortar: Masonry mortar, wall and floor tile adhesive mortar, anchorage mortar etc. Decoration mortar: Decorative plaster, inner and outer wall putty, colorful decoration mortar etc. Protection mortar: Water-proof mortar, anti-corrosion mortar, self-leveling mortar, wear resistance mortar, thermal insulation mortar, sound insulation mortar, repair mortar, mildewproof mortar, shielding mortar etc.
Contact Person: Zoey