Payment & Shipping Terms:
|Voltage:||220V/380V/410V/440V Or Customized||Color:||Customized|
|Dimension(L*W*H):||Customized||Motor Brand:||CE Certificate Motor|
|Dust Removal:||Pulse Jet Blowing||Filtration Media:||Fume/smoke/dust/powder|
|Minimum Particle Size:||30mg/Nm3|
Industrial High Quality Working Condition Automatic Pulse Dust Collector
Description of Dust Collecting System
Impulse dust collector is a kind of improved new type high efficient pulse jet bag dust collector, which has large capacity, stable performance, easy installation, long lifetime and small maintenance workload, etc. Besides, this type dust collector has been reformed from structure and pulse valves to solve such problems as outdoor setting and low pressure of compressor air. Our Impulse dust collector are self contained, weatherproof, and fully automated. if you need, we can supply and install ducting, access platforms, ventilation, instrumentation, walk-in plenums, and easy maintenance access for small or large projects.
Working principle of Impulse Dust Collector Pulse Dust Collector
The working principle of dust collector:the dust gas enters into the filter chamber by the ash bucket (or the lower open flange), and the rough particles directly drops in the ash bucket or ash bin. Filtered through the Filter-bag, the dust is kept in the bag table while the net gas is passed through the bag to the air cleaning chamber, in which the air is discharged into the atmosphere by the fan.
When the dust on the surface of the filter is increasing, leading to the equipment resistance rises to the set value, the time relay (or the micro differential pressure controller) will release the signal. Meanwhile, the program control instrument began to work, and the pulse valve is opened one by one, so that the compressed air is injected through the nozzle to clean the Filter-bag. During this process, the Filter-bag is abruptly inflated, the dust in the bag surface quickly detaches from the Filter-bag and falls into the dust (or ash bin) under the action of the reverse airflow, then the dust is discharged by the flap valve. In addition, The line by line process of injection is only for the filter-bags cleaning, and other Filter-bags are still filtered normally.
1.the filter bag device adopt cape type filter bag, kniting polyester filter bag.
2.straight-through solenoid valve, large pilse dust catcher bottom is equipped with twisted dragon, guanwind, reduce the process arrangement.
3.the dust removal efficiency up to 99%.
4.Has a unique match blowing device, using the framework of disassembly type bag structure, easy maintenance.
|Air Volume (m³/h)||600-800||1200-2100||1900-3200||2100-3600||3200-4500||3700-6300||5800-8400||8400-12000|
|Air consumption (L/min)||28||42||63||84||105||147||196||280|
|Dust emoving rate(%)||99.9%||99.9%||99.9%||99.9%||99.9%||99.9%||99.9%||99.9%|
Advantages of Dust Collecting System
1. Tangential inlet guides, on the basis of non-filter added the centrifugal dust collect effect, improved the dust collection efficiency.
2. Use special fabric filter dust,well dust collect.
3. Fan, cloth cylinder and filter assembly as one, can shorten the wind mesh simplify workmanship
process,reduce the investment of dust collector equipment.
The dust collector equip on full automatic dry mortar plant:
Contact Person: Zoey