Reasons for leakage of dry-mix mortar equipment mixer and source of solutions
In any equipment process production line, material leakage may occur, especially dry-mixed mortar equipment. If material leakage occurs, it will increase the harm to the environment. Therefore, the reasons and solutions for the leakage of the mixer of the dry-mix mortar equipment are introduced below.
Reasons for leakage of dry-mix mortar equipment
First, determine the location to deal with the leakage, that is, in the bucket elevator part, because the location is in direct contact with the raw materials, leakage problems will inevitably occur; secondly, at the outlet of the packaging machine of the production line, the dry powder mortar is packed in bags and then transported by the packaging machine. There will also be a certain amount of leakage when the packaging machine is loaded. Generally speaking, the leakage of reliable automatic metering packaging machine is not very serious; the last is the entrance of the warehouse to be mixed and the entrance of the dry-mixed mortar equipment.
Dry-mix mortar equipment leakage solution
However, if the shaft end of the mixer has not been modified or the old equipment is used before the leakage occurs, and there is still leakage in the packing seal, blast seal or lip seal, the soil method can be used to soak the oil with felt, and then tie it to the inside of the shaft head, which can also be effective. Prevent material leakage.
Dry-mix mortar equipment leakage prevention
From the above points, we can clearly know that the leakage of dry-mixed mortar equipment is mainly caused by the import and export of materials. This is not a particularly big technical problem and can be avoided. Especially in the process of production and installation, relevant details must be strictly controlled so that the equipment and production line are well known.
I believe that after reading this article, everyone has a general understanding of the leakage problem of dry-mix mortar equipment, and I hope it can be helpful to you.
Contact Person: Ms. Selina