Home News

company news about Mortar equipment manufacturers share the dosing method of dry mortar equipment

Certification
China Zhengzhou MG Industrial Co.,Ltd certification
China Zhengzhou MG Industrial Co.,Ltd certification
Customer Reviews
Dear Jason Liu It is very nice to hear from you as long time we no contact each other. By the way, the machine which we bought from you since 2017 we already assembled and being use from that time until now. So far there is no problem with the machine, so it can indicates that your machine is very good with the quality.

—— Ravin

Hello Jason , how are you? We as a Company, we really appreciate your efforts on installing the plant on time, we really are thankful on your workers, they work hard to finish the plant and we helped them a lot but we finished on time without any problem... Also we tryed to be really nice and friendly with the workers so I hope they had a great t

—— Merita

I'm Online Chat Now
Company News
Mortar equipment manufacturers share the dosing method of dry mortar equipment
Latest company news about Mortar equipment manufacturers share the dosing method of dry mortar equipment

Some people don't know how to add the dry powder mortar after buying it back. The wrong method of adding the material may affect the normal use. Today, I will tell you the correct ingredients, and I hope it will be helpful to you.

 

Mortar equipment manufacturers share the dosing method of dry mortar equipment

 

latest company news about Mortar equipment manufacturers share the dosing method of dry mortar equipment  0

 

Start the feeding device. When the metering batching bin is quickly fed to the close value, the feeding is stopped. Turn on the fine feeding device to continue feeding, and gradually approach the batching amount. Taking into account the amount of suspension, the fine feeding device will gradually decelerate and stop ahead of schedule to determine the amount of commissioning. At the same time, immediately close the shut-off valve to intercept possible collapse. The meter keeps track of the amount of material being cut at any time. After the fine feeding device stops, it will delay for one second. After it stops, the meter will display a stable value, which is the process batching amount of the first material. Immediately afterwards, the second material starts to quickly feed to the metering and batching bin and repeat the above operations until all the feeding is completed. According to personal circumstances, you can also use hand-point fine feeding.


After the metering and batching bin is filled with materials, the oblique sealing valve at the bottom of the silo will automatically open, and the materials in the metering and batching bin will be discharged into the mixer through the soft connection and pipeline. After the material is emptied, the meter returns to zero and the oblique sealing valve automatically closes. Enter the next batching cycle. If the material cannot be emptied in time, the oblique sealing valve cannot be closed automatically. You cannot enter the next program. At this time, the air nozzle automatically jets downwards obliquely to discharge the material. If it is a flexible warehouse, the massage device is automatically activated to discharge the material. The oblique port sealing valve is very important and can achieve full sealing. If the valve at the bottom of the warehouse is not well sealed and there is leakage, it will not only affect the accuracy of the ingredients, but also the dust on site that it will be too large and pollute the environment.

Pub Time : 2021-08-12 16:06:20 >> News list
Contact Details
Zhengzhou MG Industrial Co.,Ltd

Contact Person: Ms. Selina

Tel: 0086-15138961689

Fax: 86-0371-56659866

Send your inquiry directly to us (0 / 3000)